Cosmic Controller View larger

Cosmic Controller with OLED (Pre Soldered)

CosmicControllerPreS

New

IQaudIO CosmicController board with OLED display

Add 3x White LEDs, 3x Buttons, a rotary encoder (volume) with switch and an OLED display to your Pi.

No soldering required. 

It can be used as an accessory for the Pi-Zero, the full size Pi and even added to the top of the IQaudIO Pi-DAC+ / Pi-DAC PRO.

More details

£ 18.00

Data sheet

Raspberry Pi3+ compatible YES
Raspberry Pi-Zero compatible YES
Pi-DAC+ compatible YES
Pi-DigiAMP+ compatible May need increased header
Pi-Digi+ compatible would need header soldered to Digi+
Pi-DAC ZERO compatible NO
Pi-AMP compatible NO

More info

IQaudIO CosmicController board. Pre-soldered Buttons, rotary encoder, OLED connector, and 40way GPIO connector,

Cosmic Controller

128x64 White OLED display 

Oled display

Pre-soldered board providing:

  • PCB with pre-soldered LEDs and surface mount components
  • 3x Buttons
  • 1x Rotary Encoder with switch
  • 1x 2x20 Female Pin header
  • 1x 2x5 Male Right Angled Pin header
  • 128x64 OLED mono I2C display

The CosmicController can be used through Python and example code exists in our GitHub support page here: GitHub

Note: Although it is possible to add an IR sensor, this is not supplied OR pre-soldered with this product. See Vishey IR sensor for details.  

Reviews

No customer reviews for the moment.

Write a review

Cosmic Controller with OLED (Pre Soldered)

Cosmic Controller with OLED (Pre Soldered)

IQaudIO CosmicController board with OLED display

Add 3x White LEDs, 3x Buttons, a rotary encoder (volume) with switch and an OLED display to your Pi.

No soldering required. 

It can be used as an accessory for the Pi-Zero, the full size Pi and even added to the top of the IQaudIO Pi-DAC+ / Pi-DAC PRO.