GoldPhono

CMC`s low cost RCA sockets, very popular with manufacturers. Body constructed from Brass with gold plating. Two Teflon insulation washers per socket provided, marked either red or white. 10mm diameter chassis hole required. Extra long neck so these will fit a chassis up to 4mm thickness. Nut is fitted externally so no awkward internally spanner work. Overall length is 30mm.

Sold in pairs, 1 marked red and 1 white.

Features:
. Gold Plated
. High-quality brass housing and Nut cap
. PBT (red, white) Inner insulator.
. PA66 (red, white) Mounting Insulation.
. Connections: Soldered


Specifications:
. Mounting Insulation set  PA66(Red, White),15.50 ±0.1mm diameter X 2mm± 0.1mm thick,
. Body: 29.50mm ± 0.2mm overall length
. Nut: 11mm ±0.1mm  wide X 3.5mm ±0.1mm thick
. Use of open holes: 10mm

Note, these are not designed for use with the Pi-CASE. They can be used with the Pi-DAC+/Pi-DAC PRO but would need cable assemblies to be created between the IQaudIO board and the Gold Phono Socket.

THEY ARE NOT A DIRECT REPLACEMENT TO THE STANDARD IQAUDIO PHONO SOCKET. THESE ARE INTENDED FOR YOUR OWN PROJECTS BASED ON IQAUDIO BOARDS.