Audiophile DAC for the Raspberry Pi. Phono (RCA) and Heaphone (3.5mm) output, complete with PCB spacers and screws.
*** RPi2/RPi3 COMPATIBLE ***
Warning: Last items in stock!
|Raspberry Pi3 compatible||YES|
|Full-HD 192kHz / 24bit||YES|
The Pi-DAC+ plugs directly on the Raspberry Pi A+/B+/2/3, there’s no need to solder or modify your Raspberry Pi and you can be enjoying Full HD audio in minutes.
The Pi-DAC+ feature the same great Texas Instruments PCM5122 DAC as the original and respected IQaudIO.com Pi-DAC, with Linux drivers built in to Raspbian. No kernel recompilation needed.
The Pi-DAC+ also includes a headphone amplifier delivering, for the first time, an all in one Full HD audio experience for those who listen through headphones, volume is again hardware based under software control and shared with Line Out.
A fully HAT compliant Raspberry Pi expansion board with EEPROM support, the Pi-DAC+ delivers Full HD audio from your Raspberry Pi. As the Pi-DAC+ uses the same audio chipset as the previous Pi-DAC full Linux device driver support is already built into the official Raspbian Linux distribution.
If you intend to mount your Pi / Pi-DAC+ on the official 7" screen then you'll need to also buy the extra spacer pack.