Full-HD stereo (up to 2x35w) add-on Stereo Class D amplifier for LEGACY Pi-DAC+ Rev3 or LEGACY Pi-DAC PRO Rev1 boards, complete with PCB spacers.
Additional pin headers may need to be soldered to your Pi-DAC+ or Pi-DAC PRO
THIS IS AN ADD-ON BOARD FOR THE LEGACY Pi-DAC+ Rev3 / PRO Rev1 products. IT CANNOT BE USED WITH THE LATEST Pi-DAC+ or Pi-DAC PRO Designs without modification.
Warning: Last items in stock!
|Raspberry Pi3+ compatible||YES|
|NEW Pi-DAC+ compatible||NO|
|NEW Pi-DAC PRO compatible||NO|
|LEGACY Pi-DAC compatible||YES|
|LEGACY Pi-DAC PRO compatible||YES|
Designed to deliver the best audio performance from the Raspberry Pi B+/RPi2/RPi3B+, fit within the Pi’s overall form factor above the Pi-DAC+ / PRO
We have used the latest Texas Instruments ClassD amplifier chipset (TPA3118) to deliver awesome performance. As with our other products you can be assured that the Linux driver support is already built-in to Raspbian Linux and supported by the many software audio packages already on the market. RuneAudio / Volumio / MoodeAudio / PiCorePlayer / PiMusicBox / OpenELEC / Max2play and others. The IQaudIO Pi-AMP+ fits on top of the Pi-DAC+ / PRO and supports 24-bit / 192kHz file formats but is equally at home with lower quality MP3s bringing your music alive sonically.
Please note that The Pi-AMP+ uses GPIO22 as amp-mute and when powered on is in mute state, examples are in the user docs and many software releases already support the Pi-AMP+.
The IQaudIO Pi-AMP+ connects easily to the Pi-DAC+ / PRO and provides up to 2 x 35W stereo output to speakers from a 15-19v supply. NOTE - Additional header may need to be soldered to your sound card.
The IQaudIO Pi-AMP+ Features:
The IQaudIO Pi-AMP+ is suitable for the latest Raspberry Pi B+, RPi2, RPi3B+, it is not compatible with much older Raspberry Pi A and B Models.
The Pi-AMP+ is supplied with all mounting hardware and there is a specific Pi-CASE+ to be used with the Pi, Pi-DAC+ / PRO and Pi-AMP+ combination. If you intend to mount your Pi / Pi-DAC+ / PRO/ Pi-AMP+ on the official 7" screen then you'll need to also buy the extra spacer pack.
NOTE: The Pi-AMP+ requires an external power supply / brick, and when powered the Pi-AMP+ provides power to your Raspberry Pi and Pi-DAC+ / PRO in parallel. We recommend and sell the XP Power 19v supply (for 2x35w).
THIS IS AN ADD-ON BOARD FOR THE Pi-DAC+ Rev3 / PRO Rev1 products. IT CANNOT BE USED WITH THE Pi-DAC+ Rev4 or Pi-DAC PRO Rev3 Designs without modification.