HATs There are 9 products.

Showing 1 - 9 of 9 items
  • IQaudIO CosmicController board for Pi. Add 3x White LEDs, 3x Buttons, a rotary encoder (volume) with switch and even a small OLED display and IR sensor to your Pi. This kit requires soldering.  It can be used as an accessory for the Pi-Zero, the full size Pi and even added to the top of the IQaudIO Pi-DAC+ / Pi-DAC PRO.

    £ 9.99
    In Stock
  • ACCESSORY FOR THE Pi-DACZero Audiophile Headphone daughter card for the DACZero. 3.5mm Stereo output, complete with PCB spacers. 

    £ 6.00
    In Stock
  • 32 Review(s)

    ***OUT OF STOCK*** The de-facto audiophile DAC for the Raspberry Pi. This latest revision of our Pi-DAC+ is pre-programmed for auto detection & exposes the full Raspberry Pi GPIO header providing easy access for buttons, sensors, screens etc. Line out: 2x Phono/RCA Headphone: 3.5mm socket Complete with PCB spacers (9mm) & screws.  Compatible with...

    £ 33.00
    Add to cart
    Out of stock
  • 12 Review(s)

    ***OUT OF STOCK*** Line out: 2x Phono/RCA Headphone: 3.5mm socket Balanced out: 2x3pcb pin header (no fit) Complete with PCB spacers (9mm) & screws. 

    £ 44.40
    Add to cart
    Out of stock
  • KIT version of the Audiophile DAC for the Raspberry Pi Zero. Phono (RCA) output. The little (on size) brother of the Pi-DAC+ Soldering required

    £ 9.00
    Add to cart
    Out of stock
  • 11 Review(s)

    ***LATEST VERSION *** The de-facto audiophile DAC/AMP for the Raspberry Pi. This latest revision of our Pi-DigiAMP+ has pre-programmed EEPROM and exposes the full Raspberry Pi GPIO header. It also supports voltage input up to 24v and delivers the full 2.5amp to the Pi. Complete with PCB spacers (9mm) & screws. 

    £ 45.00
    In Stock
  • 2 Review(s)

    ACCESSORY FOR THE Pi-DACZero Audiophile Headphone daughter card for the DACZero. 3.5mm Stereo output, complete with PCB spacers. AVAILABLE AS A KIT - PARTIAL SOLDERING REQUIRED

    £ 4.98
    In Stock
  • KIT version of the Pi-DAC PRO XLR Daughter board for the New Pi-DAC PRO. Provides XLR output L & R for the Pi-DAC PRO Soldering required to build this KIT Soldering required to the NEW Pi-DAC PRO (1x6 header)

    £ 9.99
    In Stock
  • Pre-Built Pi-DAC PRO XLR Daughter board for the New Pi-DAC PRO. Delivers Balanced / differential output from the Pi-DAC PRO Provides 2x XLR (Neutrik sockets) output for the Pi-DAC PRO Soldering required to the NEW Pi-DAC PRO (1x6 header)

    £ 15.00
    In Stock
Showing 1 - 9 of 9 items